Biomechanical Ankle Platform System (Baps) Satelite Ii
The Biomechanical Ankle Platform System, or BAPS, Satelite II is a balance board designed to allow biomechanically accurate motion in the ankle and leg. It produces controlled, calibrated and predictable stress. Available for the right or left foot, these Satelites are designed for home therapy use following training and evaluation on the original BAPS System (see separate entry). These one-piece molded polyethylene units have a permanently-attached sphere on the bottom to create the rocking mot
Seattle Laminating Core
Designed for use with the Seattle Lightfoot when clearance is insufficient for use of the Seattle Block, but excessive for a Syme Nut. Exterior of the nylon core is convoluted and abrasive etched for secure adhesion of the laminate. After cutting to length, the core is laminated directly to the socket, and fabrication is finished conventionally using rigid urethane foam and stockinette.
Seattle Ankle (Models Sas210 & Sas211)
The Seattle Ankle is a lightweight, endoskeletal pylon and ankle combination designed to provides plantar and dorsi-flexion for indiviudals who have a lower limb amputation. It is available with or without the watercut and provides excellent resilience without transmission of shock for a smooth dynamic gait. This particular ankle prosthetic meets the endoskeletal setup requirements of the Seattle Foot, Seattle Lightfoot and the Seattle Natural Foot (see separate entries). DIMENSIONS: Foot Size R
Seattle Socket Adaptor And Seattle Mounting Plate
Lightweight socket adapter provides up to 6 degrees anterior-posterior and medial-lateral pylon angulation. Can be fitted to laminated and thermoformed sockets and is compatible with the Seattle Ankle and other 30mm endoskeletal systems. Thermoformed construction requires the Seattle mounting plate. the Seattle mounting plate provides a lightweight mounting fixture for the Seattle socket adapter and many other socket adapters.
Seattle Ankle Block (Models Sab310, 311, 312, 313, 320)
The Seattle Ankle Block is designed for the exoskeletal setup of the Child'sPlay, Seattle Foot, and Seattle LightFoot for individuals with lower limb amputations. It is lightweight, easily shaped, and made of high strength rigid polyurethane foam surrounding a nylon core. It is designed to be durable to withstand the forces imposed by dynamic response feet. DIMENSIONS: For model SAB320: foot size range 22 to 29 centimeters, minimum clearance 6.1 inches. For model SAB310 (low profile): foot size
Seattle Berkeley Adapter
Foot adapter captures toe-out during dynamic alignment with the Berkeley jig, aiding in correct positioning of the ankle block.
Seattle Syme Nut
Designed for the Seattle Lightfoot and Child's Play, the Seattle Lightfoot for Children. the Seattle Syme Nut provides secure attachment to the socket and solid support for the keel when fitting a Syme amputee. Aluminum alloy with an abrasive etched finish for adhesion to the laminate.
Seattle Lightfoot Spacers
Spacers may be used during alignment of a limb using the Seattle Lightfoot in order to elevate the pylon for adjustment access. On completion of alignment, the spacer is removed and the pylon replaced with one lengthened by the heihgt of the spacer used. May also be used to adapt an existing exoskeletal limb to the Seattle Lightfoot for trial purposes prior to new fabrication using the Seattle Ankle Block.
Seattle Mounting Bolts
Seattle Foot Mounting Bolts are selected for mechanical properties consistent with the requirements of dynamic reponse feet. Available in a variety of threads and lengths depending on application.
Seattle Child's Play (Model Slf132)
Seattle Child's Play is a lightweight, energy storing prosthetic foot for children who are a below ankle amputee. It is designed to reflect the natural appearance of a child's maturing foor. It also offers the low shock resilience of the Delrin II keel to young, growing amputees. This prosthetic meets the requirements for young amputees of all activity levels and is appropriate for use by unilateral and bilateral lower limb extremity amputees, Syme level and higher. DIMENSIONS: Available in size
Seattle Foot (Models Sfh110 & Sfh120)
The Seattle Foot is a cosmetic, energy storing prosthetic foot for individuals with a below ankle amputee. They are designed to be asthetically pleasing while providing comfort and support in a lightweight design. Advanced urethane composites for the Toe Pds, Delrin for the patented keel design, and customized proprietary foam are combined to form the lifelike cosmesis. Model SFH110 is the Lifecast style and model SFH120 is Ladies. DIMENSIONS: Lifecast: Heel height is .75 inches (1.9 centimeters
Biomechanical Ankle Platform System (Baps)
The Biomechanical Ankle Platform System, or BAPS, is a balance board designed to allow biomechanically accurate motion in the ankle and leg. It produces controlled, calibrated and predictable stress. The basic component is a lightweight platform which has permanent indices to assure proper foot placement (both right and left). A hemispherical attachment is inserted into the platform's axis of rotation located under the intersection of the biomechanical axes of the ankle. Varying the size of the
Seattle Natural Foot (Model Snf150)
The Seattle Natural Foot is a prosthetic foot designed as an alternative to the SACH foot for individuals with a lower extremity amputation. It has the performance characteristics of a compliant foot plus the additional benefits of cosmetic appeal and less weight, blended to perform naturally. This prosthetic foot features compliant keel for excellent roll-over during walking. The Natural Foot is appropriately designed for unilateral or bilateral lower extremity amputees of all ages with low to
Seattle Lightfoot Low Heel Rise (Model Slf135)
Seattle LightFoot is a prosthetic foot designed for all ages and activity levels for individuals with a lower extremity amputation. This prosthetic features the Delrin II dynamic keel response; slim, sculpted, natural cosmesis; and a lightweight design. It is appropriate for use by unilateral and bilateral amputees, syme level and higher, and it is interchangeable with the 0.75 inch Seattle Lightfoot. DIMENSIONS: Available in sizes from 22 to 30 centimeters (8-5/8 to 11.75 inches), and in widths
Seattle Endoskeletal Cosmesis (Model Sec201, Sec202)
The Seattle Endoskeletal Cosmesis is a cosmetic cover prosthetic for individuals who are lower extremity amputees. The universal leg cosmesis is durable for permanent below knee application, yet is also appropriate for temporary use. It is with a durable urethane foam design, is water resistant and matches proximal cosmesis of Seattle Foots, Models SLF130, SLF135, and SNF150 (See separate entries). DIMENSIONS: Available in 10.25 inch heigh for foot sizes 22-26 centimeters, and 15.5 inch height f
Seattle Dynamic Pylon (Models Sdp250, Sdp257, Sdp260, Sdp267, Sdp270, Sdp277 & Sdp280)
The Seattle Dynamic Pylon is an endoskeletal pylon and ankle prosthesis designed to create a smooth, dynamic gait for individuals of all activity levels who are lower extremity amputees. They combine strength of carbon with the flexibilty and low shock transmission of nylon. Designed to be used with the Seattle "Light" Limb System, the dynamic pylons are lightweight and can be adjusted both proximally and distally using Seattle Titanium Clamp Adaptors (see separate entry). These pylons are ideal
Seattle Select Pylon (Model Ssl250-P)
The Seattle Select Pylon is an endoskeletal pylon and ankle prostethic designed to provide a smooth dynamic gait for individuals with a below hnee or above knee amputation. They are made of a carbon composite featuring a flexible, dynamic carbon ankle system. The Select Pylons are strong yet featherweight with six different performance options, or "flexes" to provide optimal flexibility and strength for a wide spectrum of patient weights and activities. Using the Seattle titanium or stainless st
Seattle Select Flared Pylons (Model Ssl250-A)
The Seattle Select Flared Pylons are endoskeletal pylon and ankle prostheses designed to multiaxial flexibility for individuals who have lower extremity amputations. They are made of flexible carbon blend composites and provide six performance options to customize for each patient. The pylons feature angular adjustment at the distal foot interface and eliminate the need for additional attachment devices. Flexibility is optimized when used with the Seattle Foot, Seattle LightFoot, and the Seattle
Seattle Titanium Components (Model Sca210, Sca220, Sca240)
Seattle Titanium Components is a socket mounting system designed to be used in endoskeletal construction with the Seattle "Light" Limb System for individuals with lower extremity prosthetics. The system includes the Seattle Socket Pyramid, Seattle Clamp Adaptor, and the Seattle Foot Pyramid. They are manufactured using sintered titanium, so they are strong, yet lightweight. The Socket Pyramid uses the standard 4-hole mounting pattern and is compatible with the Seattle Laminating Block and the Se
Seattle Stainless Steel Components (Model Sca260, Sca270, Sca280)
The Seattle Stainless Steel Components is a socket mounting system designed to be used in endoskeletal construction with Seattle Limb Systems. The system includes the Seattle S.S. Socket Pyramid, the Seattle S.S. Clamp Adaptor, and the Seattle S.S. Foot Pyramid. The Socket Pyramid uses the standard 4-hole mounting pattern and is compatible with the Seattle Laminating Block and the Seattle Mounting Plate. The Clamp Adaptor effectively holds nylon, composite and aluminum 30 mm pylons and provides
Relax Xcell Wheelchair Cushion
The Relax XCell Wheelchair cushion is a gel flotation cushion designed for use by individuals who use wheelchairs. This cushion has a non-slip base, and the no-memory pressure-relieving gel contours to the body and increases the surface area. The Quad Gel Pack configuration provides even distribution of no-memory gel. An incontinence cover is included. DIMENSIONS(WxDxH): 16 x 16 x 3 inches, 17 x 17 x 3 inches, 18 x 18 x 3 inches, 18 x 16 x 3 inches, or 20 x 18 x 3 inches. WEIGHT: 6 to 8 pounds.
Relax Pleezrelite Wheelchair Cushion
The Relax PleezrElite is a foam and gel wheelchair cushion designed for use by individuals who use wheelchairs. This cushion has a Recovery 5 top with soft, stretchy, fluid-proof antifungal, antibacterial fabric. The cushion also has a Memory Foam Comfort Zone under the Ischial Tuberosities with a semi-solid layer of Xcelgel direct-poured into the middle.
The design includes contoured edges and a low profile pommel to support the pelvis and lateral and medial thigh areas. DIMENSIONS(WxD): 16 x 1
Relax Duogel Sentinel Wheelchair Cushion
The Relax DuoGel Sentinel Wheelchair Cushion is a gel and foam wheelchair cushion designed for use by individuals who use wheelchairs. This cushion features an anatomically-shaped foam base and combination of Trugel and Flogel for pressure relief. DIMENSIONS(WxDxH): 14 x 14 x 4 inches, 15 x 15 x 4 inches, 16 x 16 x 4 inches, 16 x 18 x 4 inches, 18 x 16 x 4 inches, and 18 x 18 x 4 inches. WEIGHT: 5 pounds. CAPACITY: 300 pounds.