45 Degree Torso Wedge (Model 2014)
The 45 degree Torso Wedge ##2014 is a positioning wedge designed to oblique patient. This wedge is made of polyurethane foam covered in 20 mil heavy gauge vinyl, and is heat sealed to prevent contamination. DIMENSIONS: 10 x 10 x 24 inches.
Orthocare Bolster Cylinder (Model 2019)
The Orthocare Bolster Cylinder ##2019 is a therapy roll made of polyurethane foamDE covered with 20 mil vinyl. The cylinder is heat sealed to prevent contaminationDE . DIMENSIONS: 5.5 inch diameter x 18 inches.
Orthocare Leg Brace
The Orthocare Leg Brace ##4045 is a leg positioner made of polyurethane foam. It has a contoured cavity to keep the leg in place, and may be used as a legrest pad for leg comfort when wearing a cast. The brace surrounds the leg on three sides with an open top, and extends from the ankle to the mid-thigh (of adults).
Orthocare Wedges, Triangles, & Rectangular Blocks
The Orthocare Wedges, Triangles, and Rectangular Blocks ##4005 to ##4035 are large foam shapes designed for use as positioning wedges and body supports. There are 31 different models intended for use as cranial, decubitus, and extremity blocks, and spinal and tomographic wedges in addition to general positioning use. DIMENSIONS: Triangles range from 3 x 3 x 7.25 inches to 10 x 10 x 10 inches; Rectangles range from 1/2 x 4 x 6 inches to 4 x 18 x 24 inches; Wedges range from 3.5 x 7 x 8 inches to
Orthocare Pivoting Arm Tray (Model 3012) & Dynafoam Elevated W.h.o. (Model 3013)
The Orthocare Pivoting Arm Tray and Dynafoam Elevated W.H.O. are two separate devices designed for use one with the other. PIVOTING ARM TRAY (##3012, $45.25): This mounting clamp for a wheelchair accessory is made of ABS plastic fastened to an extruded aluminum channel with limited pivot capability. The L-bars of the clamp channel adjust to adapt to all wheelchair arms. DYNAFOAM ELEVATED W.H.O. (##3013, 36.45): This wrist and hand orthosis fits into Pivoting Arm Tray to create an elevated arm po
Orthocare Rigid Frame Spaceboot & Extended Spaceboot
The Orthocare Rigid Frame SPACEBOOT and Extended SPACEBOOT are foot positioners designed to aid in eliminating, and accelerating the healing of decubitus ulcers of the heel, preventing heel cord shortening (footdrop), preventing internal or external rotation of the hip and leg, accelerating rehabilitation, and helping to keep the knee in extension. The boot consists of a rigid frame and foam insert. The Rigid Frame model (##1027, $36.25) has 2 Polynap straps with Velcro fasteners to secure the s
The Orthocare SPACEBOOT is a device that acts as a drop-foot splint, heel protector, and/or foot positioner. This boot was designed to position the ankle in a neutral position, and to prevent foot drop and heel cord shortening, inversion and eversion of the foot, and internal or external rotation of the hip and leg. The standard assembled SPACEBOOT consists of a plastic boot-shaped frame, foam insert, and 3 Velcro or Polynap straps with adjustable foam pads for positive restraint and for securin
Orthocare Modular Dynamic Knee Extender
The Orthocare Modular Dynamic Knee Extender is a knee extension orthosis and flexion contracture splint with a 3-point pressure system consisting of 2 posterior cuffs, one behind the thigh and one behind the calf, connected by adjustable length aluminum side bars and connected to a knee pad by leather straps. The cuffs are made of ABS plastic and are flanged and padded to help prevent pressure sores and swivel to distribute pressure evenly. The aluminum side bars are pre-drilled for length adjus
Orthocare Dorsiflexion Assist D.f.a. (Models 1046 To 1056)
The Orthocare Dorsiflexion Assist D.F.A. is a toe lifter orthosis designed to preventing foot drop and to control inversion and eversion of foot. Manufacturer suggests that when used with the Posterior Static Knee Immobilizer (see separate entry), this device may provide early client ambulation for evaluation. The device consists of a wide padded ankle strap with adjustable buckle closure attached to a toe strap by 2 adjustable buckle straps. Both the ankle strap and the toe strap are available
Orthocare Modular Dynamic Elbow Extender
The Orthocare Modular Dynamic Elbow Extender is an elbow extension orthosis or flexion contracture orthosis. This 3-point pressure system consists of a bicep cuff, forearm cuff, elbow pad, and aluminum side bars. The cuffs are made of ABS plastic and are flanged and padded to help prevent pressure sores, and swivel to distribute pressure evenly. The cuffs are attached to aluminum side bars by leather straps. The elbow pad is leather with stainless steel buckles. The elbow strap is adjustable for
Orthocare Restraint Belt (Model 4046)
The Orthocare Restraint Belt ##4046 is designed to immobilize an individual securely to a table or wheelchair. This nylon belt restraint has Velcro fasteners and is washable. DIMENSIONS: 5 x 72 inches.
Orthocare K.w. Shoulder Splint (Model 2056)
The Orthocare K.W. Shoulder Splint ##2056 is a modified triangular abduction splint designed for use when there is mild tension on a repaired supraspinatus tendon but the external rotators are intact, or during the course of treatment on larger tears in which the large K.W abduction brace is used initially, followed by application of the smaller K.W. triangular splint at 4 weeks. When at rest, the arm may be passively elevated. The wrist is attaced to the splint with padded Velcro straps, and a
Orthocare K.w. Humeral And Forearm Abduction Splint (Model 2055)
The Orthocare K.W. Humeral and Forearm Abduction Splint ##2055 is a shoulder brace designed to immobilize the humerus and forearm in abduction following surgery. This adjustable brace consists of a foam block contoured to fit under the axilla and around the rib cage. The splint design allows the humerus to maintain 40 degrees abduction. If a greater angle is required, a wedge is provided that has a Velcro backing to be attached to the medial side of the splint. The humerus and forarm are retaine
Orthocare Frame Mounting Block (Model 3042)
The Orthocare Frame Mounting Block ##3042 is a mounting clamp accessory that attaches Orthocare arm supports or positioning orthoses (see separate entries) to wheelchair arms. The block secures to the wheelchair arm with two bolts to grip the tubing, and has two screw holes for orthosis attachment.
Orthocare Wanchik Neutral Position Resting Wrist/hand Orthosis
The Orthocare Wanchik Neutral Position Resting Wrist/Hand Orthosis is a functional hand position splint designed to maintain the triangular position of the metacarpal heads in a resting position. The brace is sculptured to fit the thenar and hypothenar eminences of the hand, and maintains the metacarpal arch in the proper curve and angle in relation to the wrist joint. This orthosis is made of Kydex plastic, which is adaptable with a heat gun. An integral, adjustable Velcro strap system secures
Wall Mount Insulin Holder (Model 2049) & Table Stand Insulin Holder (Model 2050)
The Orthocare Wall Mount and Table Stand Insulin Holders are vial holders designed for one-handed use. The holders feature a coated clamp to secure the insulin bottle. The Wall Mount model (##2049, $17.85) is made of Plexiglas and attaches to any smooth surface by use of suction cups. The Table Stand model (##2050, $24.30) is L-shaped and stands firmly in place, by means of suction cups, on any smooth surface (countertops, desks, tables, etc).
Orthocare Wanchik's Writer ##2
The Orthocare Wanchik's Writer ##2 is a pen or pencil holder, or orthotic writing aid, that provides wrist support on the dorsal (top) surface of the forearm, wrist and hand, and full support of the index finger in a flexed writing position. Two Velcro straps secure the orthosis at the forearm and wrist. SIZES: Available in left and right hand models; Small (##4036, ##4037) and Large (##4038, ##4039).
Sleeve For Dynafoam Elbow/knee Extension Tubes (Models 1136 To 1142)
The Sleeve for Dynafoam Elbow Extension Tube is an optional cover for the elbow and knee extension tubes (see separate entry) and is designed to aid in maintaining full extension. This flat sheet is made of polyethylene and slips under the cinch straps on the extension tube. The sleeve wipes clean. DIMENSIONS: Sleeve is 13/64 inches thick. SIZES: Small (##1136, ##1139), Medium (##1137, ##1140), and Large (##1138, ##1141) for knee or elbow extension tubes, or Extra Large (##1142) for knee extensi
Orthocare Finger Abductor Extender (Models 1102 & 1103)
The Orthocare Finger Abductor/Extender is a device constructed from open-cell foam. The user's fingers are inserted in holes in the foam to maintain abduction and extension. A strap with a Velcro closure secures the unit to the hand. SIZES: Small (##1102) and Large (##1103).
Orthocare Rigid Foam Knee Spreader (Models 2045 & 2048)
The Orthocare Rigid Foam Knee Spreader is a leg positioner and knee separator made of closed-cell foam that is flexible, yet firm enough to maintain abduction. The foam is easily cleaned by hand scrubbing with a mild detergent, but will not absorb liquid. Polynap straps with Velcro closures maintain the spreader in place. SIZES: Adult (##2045, abducts legs 5 inches) and Pediatric (##2048, abducts legs 3 inches).
Dynafoam Knee Extension Tubes (Models 1132 To 1135)
The Dynafoam Knee Extension Tubes ##1132 - ##1135 are leg positioners and flexion contracture splints made of lightweight open-cell foam. The tubular design utilizes the dynamic properties of the foam to extend gradually, yet effectively. These tubes fit from midthigh to ankle to promote knee extension. Each splint has 3 Velcro cinch strap closures to secure it to the limb. The tubes may be washed or autoclaved, and the foam can be adapted with a razor blade or scissors. An optional tapered poly
Orthocare Positional Orthosis For Hand Burns
The Orthocare Positional Orthosis for Hand Burns is a functional hand splint designed to assist in preventing deformities of hands that have been burned. Made of Kydex plastic, this hand orthosis features 15 degrees of wrist dorsiflexion, thumb abduction and extension, approximately 60 degrees of flexion of metacarpophalangeal (MPC) joints, and full extension of interphalangeal (IP) joints. The Kydex plastic is easily adapted with a heat gun, and wipes clean with any aseptic solution. SIZES: Ava
Orthocare Static Knee Spreader With Mirror (Models 4042 To 4044)
The Orthocare Static Knee Spreader with Mirror is a knee separator and abductor designed with an adjustable mirror for self-catheratization and rigid knee separation. This spreader is constructed of aluminum and Kydex plastic. SIZES: Small (##4044, 6.25 inches of abduction), Medium (##4043, 9 inches of abduction), and Large (##4042, 11 inches of abduction).
Dynafoam Elbow Extension Tubes (Models 1129 To 1131)
The Dynafoam Elbow Extension Tubes are elbow extension orthoses, or flexion contracture splints, made of open-cell Dynafoam. The tubular design utilizes the dynamic properties of the foam to extend gradually, yet effectively. These tubes fit from the shoulder to the wrist to promote elbow extension. Each splint has 3 Velcro cinch strap closures to secure it to the arm. The tubes may be washed or autoclaved, and the foam may be adapted with a razor blade or scissors. An optional tapered polyethyl
Orthocare Anti-Rotation Device (Model 2046)
The Orthocare Anti-rotation Device ##2046 is a wedge shaped foot positioner that attaches to any Orthocare SPACEBOOT (see separate entry). The plate attaches to the footrest of the SPACEBOOT to allow controlled interior or exterior rotation of the hip and leg. Nylon thumb nuts lock the plate securely to the boot. NOTE: These plates are not sold independently; The Anti-rotation Device must be ordered when purchasing any style of SPACEBOOT.
Orthocare Elevating Horizontal Arm Orthosis
The Orthocare Elevating/Horizontal Arm Orthosis - Supinated or Pronated is an elevating armrest and positioner for use with wheelchairs or other chairs. The armrest is available in two styles: Models ##3034 to ##3039 are anatomically designed for supinated, neutral positioning that inhibits spasticity; Model ##3040 has a universal design that allows for pronated positioning with natural palmar arch. The system consists of an aluminum U-channel that adapts to all wheelchair arms securely with sta
Orthocare Pivoting Horizontal Arm Positioner - Pronated
The Orthocare Pivoting/Horizontal Arm Positioner - Pronated is a wheelchair armrest pad that will adapts to all wheelchair arms. This device was designed to provide pronated hand positioning with natural palmar arch. The armrest is cut down at the proximal end to allow for better positioning of the arm, and is narrow at the wrist section to decrease arm roll. The arm and hand are secured in place with 2 Velcro straps. A reinforced pivot rivet pivots the arm in a horizontal plane. DIMENSIONS: 18-
Orthocare Economy Arm Positioner Elevator (Models 3032 & 3033)
The Orthocare Economy Arm Positioner Elevator (##3032 and ##3033) is an elevating armrest and positioner designed for elevation of the forearm. This wedge elevator is made of foam with a contoured recess to position the arm. This device can be used in bed or with the pivoting arm positioning tray for wheelchairs (see separate entry). Vinyl covers are available; call manufacturer for prices. SIZES: Small (##3032, $9.35) and Large (##3033, $14.75).
Orthocare Slip-On Footrest Extenders (Model 3014)
The Orthocare Slip-On Footrest Extenders ##3014 are designed to eliminate heel slippage and override, and to provide static positioning for spasticity. The extenders are made of vacuum formed ABS (plastic). They have a raised, curved heel section and flat foot section. Padded Velcro straps cross the instep to hold each foot in place. The slip-on mounting adapts to standard footrests. The design allows a vertical fold-up position without interference. Sold in pairs.
Orthocare Sure-Grip (Models 3017 Thru 3022)
Orthocare Sure-Grip gloves are push gloves or dressing mitts designed to allow total hand use while providing complete coverage of the palm, thumb, and back of hand. The gloves are made of polyethylene and rubber with a totally padded, non-slip surface. The gloves have a Velcro cinch strap with D-ring puller. SIZES: Small, Medium, and Large for right or left hand. The gloves can be adapted to a custom fit with ordinary scissors.
Orthocare Static Knee Spreader (Models 2035 & 2041)
The Orthocare Static Knee Spreader ##2035 and ##2041 is a knee separator and hip abduction splint designed to abduct the hips and separates the knees while in sitting position. The device is constructed of aluminum and Kydex. Two curved shells fit the inside of the thighs, and are separated by an aluminum bar. DIMENSIONS: Model ##2035 provides 5 inches of abduction; Model ##2041 is adjustable to provide 5 to 10 inches of abduction. If necessary, the device can be modified with a heat gun.
Dynafoam Knee Spreader (Models 2036 & 2047)
The Dynafoam Knee Spreader ##2036 and ##2047 is a knee separator and hip abduction splint designed to abduct the hips and to separate the knees while in sitting position. The device is made of high resiliency Dynafoam covered in a polyester slip cover that is removable for washing. Dynafoam offers therapeutic, dynamic qualities when compressed. The abductor is secured by a 4-inch wide Polynap strap with Velcro fasteners that wraps around the thighs. SIZES: Adult (##2036) and Pediatric (##2047).
Orthocare Polynap is foam strap padding made of a urethane foam and napped nylonDE combination. Sold in rolls, this foam can be used to pad straps. The material iDE s napped on both sides and combines with Velcro hook material for universal fast DE ening along the entire length of the strap. DIMENSIONS: ##2001 measures .25 x 6 iDE nches x 15 feet per roll; ##2044 measures .25 x 2 inches x 15 feet per roll.
Orthocare Therapy And Cervical Wedge
Orthocare Therapy and Cervical Wedges are positioning wedges made of polyurethanDE e foam covered in 20 mil. heavy gauge vinyl. The wedges are heat sealed to preveDE nt contamination. The wedges are available in 10, 12, 16, or 20 degree inclinati DE ons. DIMENSIONS: 3 x 16 x 16 inches (##2011, $16.10); 4 x 20 x 20 inches (##2012, DE $29.85); 5 x 24 x 24 inches (##2013, $39.40); 6 x 24 x 24 inches (##2015, $58.30);DE 8 x 24 x 24 (##2016, $67.20); and 10 x 24 x 24 inches (##2017, $74.85).
Orthocare Contour Clog Foot Drop Orthosis (Model 1114)
The Orthocare Contour Clog Foot-drop Orthosis ##1114 is a foam foot positioner anDE d heel protector designed to help prevents foot drop, and is anatomically contouDE red to help prevent heel pressure. The positioner has a side vent opening that a DE llows cross ventilation with visual contact of the heel or decubitus ulcer. A PoDE lynap strap secures the orthosis to the foot.
Orthocare Universal Convoluted Heel Elbow Protector (Model 2002)
The Orthocare Universal Convoluted Heel/Elbow Protector ##2002 is a heel or elbowDE cuff made of breathable, convoluted-cut foam for breathability. The protector hDE as a 2-inch wide Polynap strap with Velcro fasteners to secure it to the foot orDE arm.
Orthocare Spaceboot Heel Elbow Protector (Models 2003 Thru 2005)
The Orthocare Spaceboot Heel/Elbow Protector (##2003, ##2004, and ##2005) is designDE ed to support the foot and ankle while suspending the heel in space. This protecDE tor is made of lightweight, open-cell polyurethane foam with 6-inch wide Polynap DE strap with Velcro fasteners. SIZES: Small, Medium, and Large.
Orthocare Knee Wedge Leg Rest (Model 2006)
The Orthocare Knee-Wedge/Leg Rest, ##2006, is a contoured leg positioner that elevates the legs and places the hips and knees in flexed position. The positioner is made of firm, flexible polyurethane foam, and is covered with a polyester slip -type material that is removable and washable. DIMENSIONS: 10 x 24 x 20 inches.
Orthocare Abduction System (Models 1037, 4040, & 4041)
The Orthocare Abduction System is a hip abduction splint designed to be used post-operatively with AM Prosthesis. The wedge is constructed of polyurethane foam and has concave sides to accommodate the legs and Polynap straps to immobilize legs in the desired position. SIZES: Small (##1037), Medium (##4040), and Large (##4041). DIMENSIONS: Small measures 5 x 11.5 x 19.5 inches; Medium is 7 x 17 x 22 inches; and Large is 8.5 x 22 x 23.5 inches.
Orthocare Abduction Bar (Model 1036)
The Orthocare Abduction Bar ##1036 is a hip abduction splint designed to be used with the Orthocare SPACEBOOTS (see separate entry) to maintain neutral ankle position while providing abduction positioning. The boots attach to the bar with pressure sensitive Velcro. This lightweight and adjustable bar is made of styrene plastic, and is non-weightbearing.
Orthocare Posterior Static Knee Immobilizer (Models 1043 Thru 1045)
The Orthocare Posterior Static Knee Immobilizer is a knee orthosis designed to provide static extension positioning. The brace consists of an ABS plastic shell with a closed-cell padded liner, 3 adjustable padded straps at the thigh, patella and calf; the padded leather knee strap with patella hole and stainless steel buckles allows for positive immobilization and strength. SIZES: Fits left or right leg; Small (##1043, $86.45), Medium (##1044, $92.85), and Large (##1045, $98.10).
The Wanchik's Writer is a pen or pencil holder and writing orthosis that attaches to the hand and index finger. Available in models for the right or left hand, the brace holds the writing instrument in three- point pinch. SIZES: Junior, Small (women), and Large (men).
Orthocare 45 Degree Total Arm Elevator
The 45 Degree Total Arm Elevator is an arm positioner designed to abduct the arm and maintain a 45 degree elevation to aid in edema prevention. This positioner can be used for postoperative mastectomy patients or as an abductor for burn patients. The device consists of a foam wedge with a contoured cavity to keep the arm securely in place. For situations where bed width is limited, the elevator is also available in a narrow version. A vinyl cover is available; contact manufacturer for pricing in
Orthocare Suprone Headrest (Model 2018)
The Orthocare Suprone Headrest ##2018 is a contoured headrest designed to provide stable supine or prone positioning. It is made of polyurethane foam, and has a cross ventilation slot for breathing. SIZES: One size fits all.
Orthocare Rigid Hand Cone (Model 1086)
The Orthocare Rigid Hand Cone ##1086 is a non-flexible cone made of sturdy ABS (plastic) designed for situations where dynamic forces are not preferred. The cone is attached to the hand with 2-inch wide Polysnap strap wrapped around the wrist "figure 8" style and secured with Velcro fasteners. DIMENSIONS: One size fits right or left hand, 1.5-inch diameter x 4-inch diameter x 5 inches long.
Orthocare Rigid Foam Hand Cone (Model 1104)
The Orthocare Rigid Foam Hand Cone ##1104 is made of closed cell foam that does not absorb liquids. The cone is attached to the hand with a 2-inch wide Polysnap strap that wraps around the wrist "figure 8" style, and is secured with Velcro fasteners. The cone is hand washable with simple detergents. DIMENSIONS: One size fits either the right or left hand; 1.75-inch diameter x 3-inch diameter x 5 inches long.
Dynafoam Hand Cone (Models 1083 Thru 1085)
The Dynafoam Hand Cone is made of high resiliency Dynafoam that offers dynamic properties for therapeutic effect. The cones are covered with a removable, washable polyester cover. A 2-inch wide Polynap strap with Velcro fasteners wraps around the wrist "figure 8" style to secure the cone to the hand. DIMENSIONS (dia./dia./length): 1.5 x 2.75 x 5 inches (Small), 2 x 3.25 x 5 inches (Medium), or 3 x 4.25 x 5 inches (Large). SIZES: Fits either the right or left hand; Small (##1083), Medium (##1084)
Orthocare Anatomical Cone Hand Orthosis (Models 1108 Thru 1113)
The Orthocare Anatomical Cone Hand Orthosis is a hand cone designed to provide supinated neutral positioning of hand, and to maintain slight finger flexion and metacarpal arch. The brace is made of lightweight plastic. 2 Velcro straps secure the orthosis to the hand. SIZES: Available for the left or right hand; Small (##1108, ##1109), Medium (##1110, ##1111), and Large (##1112, ##1113).
Mit Dynafoam Wrist And Hand Orthosis (Models 1057 Thru 1064)
The MIT Dynafoam Wrist and Hand Orthosis is designed to encourage and maintain normal extension of the wrist, fingers, and thumb joints. This contoured foam splint "sandwiches" the hand and provides an anatomical position of 10 degrees wrist dorsiflexion and normal finger and thumb extension and abduction. Dynafoam is a compression foam that provides volar and dorsal extension force to the hand and wrist, which decreases as flexed joints assume a normalized extended position. 2 Velcro cinch stra
Orthocare Neutral Position Wrist Hand Orthosis (Models 1115 Thru 1128)
The Orthocare Neutral Position Wrist/Hand Orthosis is a spasticity- type splint with an anatomical cone design with premolded metacarpal arch that maintains slight flexion of all finger joints, and supported thumb in opposition. Due to the elimination of a radial border, the splint allows easy forearm pronation and supination. The recessed ulnar styloid area helps eliminate pressure. The brace is completely flanged and has rounded edges to insure against possible injury by the user. The custom o
Dynafoam Arthritic W.h.o. (Models 1065 Thru 1070)
The Dynafoam Arthritic W.H.O. (wrist/hand orthosis) is a night splint designed to position the wrist and fingers in normal anatomical alignment and to discourage ulnar drift of the wrist and fingers. The brace is made of Dynafoam, a foam material that provides high resiliency and innate dynamic forces when compressed or stretched. The orthosis has a Velcro fastener system to secure it to the area. SIZES: Available for left or right hand models; Small (##1065, ##1066), Medium (##1067, ##1068), an
Dynafoam Functional Hand Positioner (Models 1106 & 1107)
The Dynafoam Functional Hand Positioner ##1106/##1107 is a hand orthosis designed to abduct and extend the fingers with the thumb in opposition. The splint is made of open-cell, breathable Dynafoam. The user inserts the fingers and thumb into the foam, and the splint is secured with a strap which wraps around the wrist "figure 8" style and fastens with Velcro closures. SIZES: All models fit either the left or right hand; Small (##1106) or Large (##1107).