---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted headset for an adult with juvenile rheumatoid arthritis and spinal fusion. This individual has limited mobility, can only lift her arms to her chest, and cannot bend her neck. She mostly relies on Dragon Naturally Speaking voice recognition software since she can only type for a short time without pain; however, she is unable to put on or take off the microphone headset by herself. Designers observed that she was able to m
Dual Channel Headsets For The Visually Impaired (Model Smh 1783-11)
The Dual Channel headset for the Visually Impaired, model SMH 1783-11, is a microphone headset designed to fit a variety of communication applications requiring the use of two channels for individuals with a visual disability. The models are designed for use by secretaries and receptionists in transcribing from dictation devices and for use by telephone operators with visual disabilities using talking terminals. It is based on the StarMate Supra headset where one channel allows the user to trans
The Starset is a headset receiver with microphone designed to fit over the ear for people requiring hands-free telephone operation. Features include a quick disconnect cord and a standard pigtail plug. The microphone wand extends in front of the mouth and helps to provide minimal distraction. This microphone is not designed for use with telephone system. OPTIONS: Eyeglass adapter available.
Tape Deck Modification.
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Modification to the tape deck switches for ease of use by someone with out good finger control. The mode switch was redesigned to make selection easier by increasing the size and shape of the switch and decreasing the amount of force required to turn it on. The record button was modified by a spring steel push bar eliminating precise finger dexterity. Includes drawings. SKILLS REQUIRED: Metalworking. AUTHOR: Bob Warren, UCP of Akron, 318 Water Street,
Tape Recorder (Model 390, 390-8)
The Tape Recorder is an adapted cassette tape recorder designed to be operated by a switch for individuals with physical disabilities. It is ideal for voice or music and can be used with or without an external switch. POWER: The AC line cord has been removed for safety reasons so it can only be used with batteries.
Tape Recorder Adaptation For Low Force Actuation
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Allows a person with limited finger strength to actuate tape recorder control buttons. Commercially available tape recorder is placed into a wooden unit which has custom positioned levers and/or sliding arms. Two versions are shown in photographs. Concepts can be applied to other models of tape recorders. SKILLS REQUIRED: Woodworking. AUTHOR: Gugerty, J.; Tindall, L. TITLE: Tools, Equipment & Machinery Adapted for the Vocational Education & Emp
Tape Recorder Control For Persons With Limited Hand Function
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Base and sliding extended lever adaptation for a small (approximately 1 1/2 by 7 by 4 1/ 2 inches: minisette-9 tape recorder from Radio Shack) tape recorder to allow its use by a person with limited hand function. The recorder is fastened to a jig made of aluminum, plastic or wood with rubber feet to keep it from moving around. A clear plastic lever is attached to a rod with a teflon block, and this slides along a rod suspended fron the jig with angle
Tape Recorder Operable By Chin Switch
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Independent operation of a portable tape recorder by a person with no upper extremity use. Example described is for a person with bilateral upper extremity amputation. Attach a tape recorder to a camera shoulder strap, so recorder can be worn over the shoulder. mount a microphone on the shoulder strap, positioned close to the individuals mouth. Mount a switch on the shoulder strap, positioned where it can be turned on and off by the individual's chin.