CORONAVIRUS (COVID-19) RESOURCE CENTER Read More
do-it-yourself

Assistive Technology for people with communication disabilities Using Makey Makey

AbleData does not produce, distribute or sell any of the products listed on this website, but we provide you with information on how to contact manufacturers or distributors of these products. If you are interested in purchasing a product, you can find companies who sell it below.

Assistive Technology for people with communication disabilities Using Makey Makey is designed for use by individuals who are not able to use their natural voice to express their needs. 

Materials:

  • Makey Makey
  • Used box - The author's box is 6.5 x 3.5 inches, but a larger box can be used.
  •  8 Connector wires
  • Momentary buttons ( Amazon Link )
  • Tape
  • Baking Clay
  • Acrylic Ink

Tools:

  • Scissor/needle
  • Pen
Technical Specifications: 

Step 1: Getting the buttons ready!

  • First, gather your box and mark down four holes the size of your buttons. Please remember to leave space for the makey makey to go inside the box, like the picture above.
  • Using a scissor or a needle, cut down those holes, so the buttons can fit exactly on it.
  • Insert the button in one side and the nut in the other side. Make sure the button is fixed properly.
  • Using the baking clay, design three button caps of about one inch (or the size you think it is better for you) and paint them in different colors.
  • Using super glue, glue those buttons caps to the buttons. Let stand still for about 5 minutes.
  • Draw on paper labels "water", "food" and "Help" (or something else you want - we will discuss this later).
  • * If you want you can use anything as a button cap, not necessarily baking clay. Be creative.

Step 2: Getting makey makey ready!

  • Inside the box, fix the makey makey board using tape (remember to fix it in the spot that you reserved to the board previously!)
  • After the board is settled, it is time to connect everything! For each button, connect one wire in the "earth" and the other wire in the "WASD" part, like the image below. If you are following the same model that I used, connect: W for Water, A for Food, S for Help and D for Back buttons.
  • For last but not least, connect the USB cable into the board. Make a small hole on the bottom of the box, so the other side of the cable can be connected to the computer (like a "tale" of the box).

Step 3: Get the software ready!

  • Now that you should have all set, the only missing part is the software. So, my friend Andre and I designed a simple software that should work just fine for simple necessities. The software can be downloaded here, and all you need to do is download it and run it.
  • This is how it works: when you press a button on the box, the software recognizes and shows it what you press, and also makes a sound in case that the patient doesn't have any one around at the moment. Therefore, the patient can have his own privacy for some moments, and the relatives don't need to worry about them.
  • If you need anything different from Water, Food and Help, together with the application, there is the programming code that you can edit to better fit your needs.
  • If you have any questions or suggestions, please feel free to contact me through email at gustavo_k@outlook.com !
  • This project was made by Gustavo Leite Kobayakawa with a BIG help of my friend Andre Marinho, under supervision of Dr. Jeremy Rickli, at Wayne State University, Detroit, MI, and sponsored by CAPES, Brazilian government and Institute of International Education (IIE).

Available

Price Check
Price: 
0.00
as of: 
08/09/2016
Additional Pricing Notes: 
Cost of supplies and materials.
Seller(s): 
Assistive Technology for people with communication disabilities Using Makey Makey